Nip loading

Follow nip engagement and release to connect contact load with traction and roller spin-up.

What changes when the pressure roller engages?

Animation of the simulated nip engaging and releasing the web.

Setting up the nip

An undriven nip roller moves against a web running over a transport roller. The assembly diagram connects the prescribed nip motion to the contact model. As the nip closes, normal load develops and friction accelerates the roller. The animation follows the same engagement and release sequence.

Nip-loading assembly and prescribed motion.
Nip-loading assembly and prescribed motion.

Model: Roll2RollDynamics.Examples.NipLoading · open source on GitHub

Load, spin-up and traction

Compare the roller speeds with the applied nip load.

Nip spin-up and coast-down. Negative drum velocity denotes counter-rotation; contact slip approaches zero.
Nip spin-up and coast-down. Negative drum velocity denotes counter-rotation; contact slip approaches zero.

The load plot identifies engagement, the holding interval and release; the speed plot shows spin-up and coast-down through those stages. The negative drum speed denotes counter-rotation, while the approaching surface speeds reveal the change in contact slip.

Nip load rises during engagement, holds at the actuator limit and falls during release.
Nip load rises during engagement, holds at the actuator limit and falls during release.

Finally, the traction plot shows how much more load the web can carry while the nip is closed than with the wrap alone.

Traction capacity with the nip engaged compared with the wrap acting alone.
Traction capacity with the nip engaged compared with the wrap acting alone.

← Back to Roll2RollDynamics